Industrial Ethernet Media Converter
The HEPDA HMC-IDM-F1NPP Industrial Ethernet Media Converter is a rugged, high-performance device designed to keep your network stable even in harsh industrial conditions. It helps convert standard copper Ethernet signals into fiber optic signals, allowing your network to reach much longer distances with stronger, interference-free connectivity.
Built for factories, outdoor locations, surveillance systems, utilities, and transportation networks, this converter makes it easy to extend your Ethernet network while maintaining smooth, uninterrupted data transmission.
Key Features
Industrial-grade Ethernet-to-fiber media converter
Wide temperature range: –20°C to 70°C
PoE+ (802.3af/at) support up to 30W
Supports 10/100 Mbps Ethernet
Long-distance fiber transmission: 2 km (MM) / 20 km (SM)
SC fiber connector.
Strong surge, ESD, and EMI protection
DIN-rail or wall-mount installation
Redundant 48–57V DC power input
IP40 aluminum housing for durability
Applications
The Industrial PoE+ Media Converter is ideal for :
Industrial automation networks
Security and surveillance systems
Intelligent transportation infrastructure
Energy and utility communication networks
Remote or outdoor installations that require rugged network equipment
Why This Media Converter Is a Great Choice
Works perfectly in harsh industrial conditions like extreme temperatures, vibration, and electrical interference.
Provides PoE+ power (up to 30W) to IP cameras, access points, and industrial devices.
Supports long-distance communication up to 20 km (single-mode fiber).
Offers strong protection against electrical noise (EMI/EMC).
Simple plug-and-play installation—no technical setup needed.
Built with a durable IP40 aluminum casing for long-term reliability.
Benefits for Your Network
Stable data transmission over long distances
Reduces cabling cost thanks to PoE+ power output
Improves reliability in industrial and outdoor areas
Low maintenance with long MTBF (300,000+ hours)
Helps prevent downtime and improves overall system performance
Technical Specifications
| Standard | IEEE802.3 10Base-TX |
| IEEE802.3i 10Base-TX | |
| IEEE802.3u 100Base-TX/FX | |
| Processing Type | Store and forward |
| Forward Filter Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| Cabling | 10Base-TX Cat3, 4, 5 UTP (≤100 meter) |
| 100Base-TX: Cat5 or above UTP (≤100 meter) | |
| Bandwidth | 1.6 Gbps |
| Packet Buffer Memory | 1 Mbit |
| Packet Forwarding Rate | 1.2 Mpps |
| MAC Address Table | 2K |
| Maximum Frame Size | 9000bytes packet size |
| Flow Control | Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
| Interface | |
| RJ45 port | 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X |
| PoE port | IEEE 802.3af/at, PSE (30W) , 1/2(+), 3/6(-) |
| Optical | SC |
| LED Indicators | Power: Red; |
| Fiber: Link 2(Green); | |
| Ethernet: Yellow; | |
| Optical | |
| Cabling | 62.5/125μm (Multimode) |
| 9/125μm (Singlemode) | |
| Maximum Distance | 2Km (Multimode) |
| 20Km (Singlemode) | |
| Wavelength | 1310nm |
| 1310/1550nm | |
| Connector | SC |
| Electrical and Mechanical | |
| Input Power | 48-57VDC (Terminal block, Redundant power) |
| Power Consumption | Max. 3W (without PoE); Max. 33W (with PoE) |
| Surge Protection | ±4KV |
| Dimensions | 118 × 86 × 39 mm |
| Weight | 360g |
| Casing | Aluminium case, IP40 |
| Mounting Options | DIN-Rail and Wall Mount |
| Environmental | |
| Operation Temperature | -20˚C to 70˚C (-4˚F to 158˚F) |
| Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
| Relative Humidity | 5% to 95% non-condensing |
| MTBF | > 300,000 hrs |
| Regulatory Approvals (Pending) | |
| FCC Part 15, Subpart B | |
| ANSI C63.4: 2014 | |
| FCC CFR47 Part 15, EN55022/CISPR22, Class A | |
| IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air) | |
| IEC61000-4-3 (RS): 10V/m (80~1000MHz) | |
| IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV | |
| IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV | |
| IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) | |
| IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) |
Downloads & Resources
Download technical documentation, datasheets, and installation guides for the Media Converter
Product Datasheet
Complete technical specifications, features, and performance data for the IMAC-D4F-FMBP media converter.
Installation Manual
Complete installation manual for the IMAC-D4F-FMBP media converter, please refer the manual for your reference
Frequently Asked Questions ?
What is the HMC-IDM-F1NPP used for?
The HMC-IDM-F1NPP is an industrial-grade Ethernet media converter that connects 10/100Base-TX copper Ethernet networks to 100Base-FX fiber optic networks, extending transmission distances and improving network reliability in harsh environments.
Is the HMC-IDM-F1NPP suitable for outdoor or industrial environments?
Yes, it is designed with a rugged casing, supports wide operating temperatures, and offers redundant power inputs, making it highly reliable for deployment in industrial plants, transportation systems, and outdoor applications.
Does the HMC-IDM-F1NPP require complex setup or configuration?
No. The HMC-IDM-F1NPP supports Plug-and-Play installation, allowing for fast and easy deployment without complicated configurations.
What fiber connector types are supported by the HMC-IDM-F1NPP?
The HMC-IDM-F1NPP is compatible with 100Base-FX SFP modules, allowing flexibility with singlemode or multimode fiber options depending on the application needs.
Why Choose HEPDA HMC-IDM-F1NPP?
If you need a media converter that can survive tough conditions and deliver stable Ethernet-over-fiber connectivity, this model is built for exactly that.
Its rugged design, long transmission distance, and PoE+ support make it reliable for critical operations where network failure is not an option.