Gigabit Media Converter
The HMC-IDM-G1NPp is an industrial-grade Ethernet media converter that connects 10/100/1000Base-TX (PoE+) to 1000Base-FX fiber networks. It offers seamless data and power transmission for PoE-enabled devices such as IP cameras and access points, with high reliability for mission-critical applications. Designed with redundant DC power inputs and rugged construction, it ensures stable operation in harsh industrial environments.
Main Features
1 x 10/100/1000Base-TX RJ-45 port with Auto-Negotiation and Auto-MDI/MDI-X support
Redundant 48–57V DC power input for enhanced reliability
IEEE 802.3af/at PoE+ compliant, delivering up to 30W output
1 x 1000Base-FX fiber port with SC connector
Built-in 6KV ESD protection on Ethernet interfaces
6KV EFT protection on power lines to prevent electrical disturbances
Resistant to shock, vibration, and free fall for industrial deployment
Flexible DIN-rail and wall-mount installation options
Technical Specifications
| Standards | IEEE802.3 10Base-TX |
| IEEE802.3i 10Base-TX | |
| IEEE802.3u 100Base-TX/FX | |
| IEEE802.3ab 1000Base-TX | |
| IEEE802.3z 1000Base-X | |
| IEEE802.3x | |
| Processing Type | Store and forward |
| Forward Filter Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Cabling | 10Base-TX Cat3, 4, 5 UTP (≤100 meter) |
| 100Base-TX: Cat5 or above UTP (≤10 meter) | |
| 1000Base-TX: Cat6 or above UTP (≤100 meter) | |
| Bandwidth | 14 Gbps |
| Packet Buffer Memory | 1.2 Mbit |
| Packet Forwarding Rate | 10.5 Mpps |
| MAC Address Table | 2K |
| Maximum Frame Size | 9000bytes packet size |
| Flow Control | Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
| Interface | |
| RJ45 port | 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X |
| PoE port | IEEE 802.3af/at, PSE (30W) , 1/2(+), 3/6(-) |
| Optical | SC |
| LED Indicators | Power: Red; |
| Fiber: Link 2(Green); | |
| Ethernet: Yellow; | |
| Optical | |
| Cabling | 62.5/125μm (Multimode) |
| 9/125μm (Singlemode) | |
| Maximum Distance | 2Km (Multimode) |
| 20Km (Singlemode) | |
| Wavelength | 1310nm |
| 1310/1550nm | |
| Connector | SC |
| Electrical and Mechanical | |
| Input Power | 48-57VDC (Terminal block, Redundant power) |
| Power Consumption | Max. 3W (without PoE); Max. 33W (with PoE) |
| Surge Protection | ±4KV |
| Dimensions | 118 × 86 × 39 mm |
| Weight | 360g |
| Casing | Aluminium case, IP40 |
| Mounting Options | DIN-Rail and Wall Mount |
| Environmental | |
| Operation Temperature | -20˚C to 70˚C (-4˚F to 158˚F) |
| Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
| Relative Humidity | 5% to 95% non-condensing |
| MTBF | > 300,000 hrs |
| Regulatory Approvals (Pending) | |
| FCC Part 15, Subpart B | |
| ANSI C63.4: 2014 | |
| FCC CFR47 Part 15, EN55022/CISPR22, Class A | |
| IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air) | |
| IEC61000-4-3 (RS): 10V/m (80~1000MHz) | |
| IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV | |
| IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV | |
| IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) | |
| IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) |
Downloads & Resources
Download technical documentation, datasheets, and installation guides for the Media Converter
Product Datasheet
Complete technical specifications, features, and performance data for the IMAC-D4F-FMBP media converter.
Frequently Asked Questions ?
What is the HMC-IDM-G1NPp used for?
The HMC-IDM-G1NPp is used to connect Ethernet-based devices to fiber optic networks while supplying PoE+ power to connected equipment such as IP cameras, wireless access points, and sensors.
What is the maximum PoE+ output supported?
It supports IEEE 802.3at PoE+, delivering up to 30 watts of power over the Ethernet port.
Can the HMC-IDM-G1NPp operate in extreme temperatures?
Yes, it operates reliably in a wide temperature range from -40°C to +75°C, making it suitable for demanding industrial and outdoor environments.
What type of power input does this model support?
It features redundant 12~48V DC power inputs to ensure uninterrupted operation in case one power source fails.
Is the unit plug-and-play?
Absolutely. The HMC-IDM-G1NPp requires no configuration and supports plug-and-play installation for easy deployment.