Industrial Ethernet Patch Cords
Hepda’s Ethernet patch cords are engineered to deliver consistent, high-speed connectivity for both industrial and enterprise networks. Available in Cat5e, Cat6, and Cat6A variants, our cables ensure minimal signal loss, maximum durability, and compliance with international standards.
Hepda’s Ethernet Patch Cords ensure stable, high-speed connections in demanding environments. Available in Cat5e, Cat6, and Cat6A variants to meet your project’s specific needs
General
- Cat5e, Cat6, and Cat6A Options - 100% Factory-Tested for Performance - Shielded and Unshielded Models Available - Slim and Standard Boot Designs - Lengths from 0.5m to 30m
Compliance
- ISO/IEC 11801 - TIA/EIA 568-C.2 - EN50173 RoHS 2011/65/EU - REACH EC 1907/2006
Technical Specifications
| Design & Materials | |
|---|---|
| Conductor & Diameter | Solid bare copper |
| 0.57 + 0.005mm / 23 AWG | |
| Insulation & Diameter | HDPE |
| 1.02 + 0.02mm | |
| Cross separator | 4.5 * 0.45mm |
| Rip cord | Optional |
| Jacket & Diameter | LSHZ |
| 6.2 + 0.5mm | |
| Thickness | > 0.5mm |
| Electrical Date | |
| Linear Resistance | < 9.5Ω / 100m |
| Insulation resistance | > 5000M Ω / km |
| Mutual Capacity | < 5.6nF/ 100m |
| Unbalance capacity | < 330pF / 100m |
| Characteristic impedance | 100 + 15 Ω |
| Dielectric strength | DC.1Kv.1min no break |
| Mechancal & Installation Data | |
| Conductor Elongation ratio | > 15% |
| Insulation Tensile strength | > 16 Mpa |
| Insulation Elongation ratio | > 300% |
| Jacket Tensile strength | > 13.5 Mpa |
| Jacket Elongation ratio | > 150% |
| Working temperature | -20°C to + 60°c |
| Bending radius | > 10 X out diameter |
| Compliance | |
| ISO/IEC 11801 | |
| TIA/EIA 568-C.2 | |
| EN50173 RoHS 2011/65/EU | |
| REACH EC 1907/2006 |
Downloads & Resources
Download technical documentation, datasheets, and installation guides for the Media Converter
Product Datasheet - CAT6 UTP
Complete technical specifications, features, and performance data for the CAT6 UTP
Product Datasheet - CAT6A UTP
Complete installation manual for the CAT6A UTP, please refer the manual for your reference
Frequently Asked Questions ?
What is the difference between Cat5e, Cat6, and Cat6A Ethernet Patch Cords?
Cat5e cables support up to 1 Gbps speed and are ideal for everyday networking.
Cat6 cables offer higher bandwidth (up to 10 Gbps over shorter distances) with better crosstalk protection.
Cat6A cables further enhance performance, supporting full 10 Gbps speeds over 100 meters and reduced signal loss.
Are Hepda’s Ethernet Patch Cords suitable for industrial environments?
Yes, Hepda’s patch cords are designed to perform in both commercial and industrial environments, offering high durability, minimal signal loss, and compliance with strict international standards.
What cable lengths and designs are available?
We offer a wide range of lengths from 0.5 meters to 30 meters, with options for slim or standard boot designs, and both shielded and unshielded models to meet specific installation needs.
What are the colours available?
We have various colours, Please refer to datasheet under downloads