Hardened Grade Unmanaged 8-port
10/100/1000Base-TX + 2-port 1000Base-SFP Ethernet Switch with Redundant DC Power Inputs
Main Features
Fault Alarm (via electric relay)
The built-in fault alarm function sends out alert via the electric relay when there’s fault on the network switch. It helps measure performance and quickly find out anomalies of the network switch.
Dual Power Input for High Reliability
Automatically switch to secondary power input when primary power input fails, ensuring continuous operation without down time.
Redundant power supply reduces possibility of single-point-of-failure.
Environmentally Hardened Design
With a compact metal housing with an IP40 rating
Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations.
Extended ambient operating temperature range: -40 ̊ C to +75 ̊ C
8 10/100/1000Base-TX + 2 1000Base-SFP
Supports IEEE802.3az energy-saving technology
Supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX
9K Bytes Jumbo Frame
Supports Broadcast Storm Control
Supports 802.3x Flow control
10/100/1000Mbps RJ45 Port
Supports external 1000Base-SFP
2M bits frame buffer memory
Supports Wall-mount and DIN-Rail installation
Technical Specifications
| Standards | IEEE802.3 |
| IEEE802.3u | |
| IEEE802.3x | |
| IEEE802.3z | |
| IEEE802.3az | |
| IEEE802.3ab | |
| IEEE802.1q | |
| IEEE802.1X | |
| Processing Type | Store-and-Forward |
| Forward Filter Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Cabling | 10Base-TX: Cat5 or above |
| 100Base-TX: Cat5 or above | |
| 1000Base-TX: Cat5 or above | |
| Packet Buffer Memory | 2 Mbits |
| Max Packet Length | 9216 Bytes |
| Address Table Size | 4K |
| Switch Fabric | 20Gbps |
| Interface | |
| RJ45 port | 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X |
| SFP port | 1000Base-SFP (Suggest HEPDA SFP) |
| LED Indicators | Power; Link; |
| Optical | |
| SFP port | 1000Mbps |
| Electrical and Mechanical | |
| Input Power | DC9-56V (Terminal block, Redundant power) |
| Power Consumption | 5W, Max. 0.1A@48VDC |
| Connector | 1 removable 6-contact terminal blocks |
| Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm | |
| Dimensions | 138 x 108 x 49 mm |
| Weight | 650 g |
| Casing | Aluminum Case |
| Mounting | DIN-Rail and Wall Mount |
| Environmental | |
| Operation Temperature | -40˚C to 75˚C (-40˚F to 167˚F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity | 5% to 90% non-condensing |
| MTBF | > 100,000 hrs |
| Regulatory Approvals | |
| EMC | CE (EN55032, EN55035) |
| EMI | FCC Part 15 Subpart B |
| EMS | EN61000-4-2 (ESD); EN61000-4-3 (RS); |
| EN61000-4-4 (EFT); EN61000-4-5 (Surge); | |
| EN61000-4-6 (CS); EN61000-4-8 (PFMF); EN61000-4-11; | |
| Surge Protection | 6KV for RJ-45 and SFP ports |
| Shock | IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
Downloads & Resources
Download technical documentation, datasheets, and installation guides for the Media Converter
Product Datasheet
Complete technical specifications, features, and performance data for the IMAC-D4F-FMBP media converter.
Frequently Asked Questions ?
What is the maximum power output for each PoE port?
Each of the 8 Ethernet ports supports IEEE 802.3at PoE+, delivering up to 30W per port.
Are the fiber ports uplink-only or can they function in both directions?
The 100Base-FX SFP ports serve as uplinks for long-distance transmission, typically to aggregation switches or core network nodes.
Is the switch suitable for industrial environments?
Yes, the HUS-HDM-F82S supports DIN-rail mounting, surge protection, and an extended temperature range, making it ideal for outdoor and industrial deployment.
Does it require any configuration?
No, it is a fully plug-and-play unmanaged switch. No software or setup is required.