Industrial 8-Port PoE+ Switch with Fiber Uplinks
The Hepda HUS-HDM-F82SPp9 is a high-performance unmanaged switch offering 8 x 10/100Base-TX PoE+ ports and 2 x 100Base-FX SFP fiber uplinks. Built for industrial reliability, it delivers power and data in a single cable, reducing infrastructure cost for security, automation, and utility applications.
Main Features
IEEE 802.3bt PoE++ Solutions
The product adopts IEEE 802.3bt PoE++ standard technology, provides up to 95 watts per port output as an ideal solution for higher power consumption network PDs, such as POS system, digital signage.
Fault Alarm (via electric relay)
The built-in fault alarm function sends out alert via the electric relay when there’s fault on the network switch. It helps measure performance and quickly find out anomalies of the network switch.
Dual Power Input for High Reliability
Automatically switch to secondary power input when primary power input fails, ensuring continuous operation without down time.
Redundant power supply reduces possibility of single-point-of-failure.
Environmentally Hardened Design
With a compact metal housing with an IP40 rating
Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations.
Extended ambient operating temperature range: -40 ̊ C to +75 ̊ C
8 10/100/1000Base-TX + 2 1000Base-SFP
Supports IEEE802.3az energy-saving technology
Supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX
9K Bytes Jumbo Frame
Supports Broadcast Storm Control
Supports 802.3x Flow control
10/100/1000Mbps RJ45 Port
Supports external 1000Base-SFP
2M bits frame buffer memory
Supports Wall-mount and DIN-Rail installation
Technical Specifications
| Standards | IEEE802.3 |
| IEEE802.3u | |
| IEEE802.3x | |
| IEEE802.3z | |
| IEEE802.3az | |
| IEEE802.3ab | |
| IEEE802.1q | |
| IEEE802.1X | |
| IEEE802.3bt Power over Ethernet | |
| Processing Type | Store-and-Forward |
| Forward Filter Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Cabling | 10Base-TX: Cat5 or above |
| 100Base-TX: Cat5 or above | |
| 1000Base-TX: Cat5 or above | |
| Packet Buffer Memory | 2 Mbits |
| Max Packet Length | 9216 Bytes |
| Address Table Size | 4K |
| Switch Fabric | 20Gbps |
| Interface | |
| RJ45 port | 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X |
| PoE port | IEEE 802.3bt (95W), 1/2(+), 4/5(+), 3/6(-), 7/8(-) |
| SFP port | 1000Base-SFP (Suggest HEPDA SFP) |
| LED Indicators | Power; Link; PoE |
| Optical | |
| SFP port | 1000Mbps |
| Electrical and Mechanical | |
| Input Power | DC9-56V (Terminal block, Redundant power) |
| input voltage for PoE: DC52-56V (suggest 56V) | |
| PoE Power | Maximum 95W per port |
| Total PoE Output | 480W |
| Power Consumption | Max. 5W (without PoE); Max. 485W (with PoE) |
| Connector | 1 removable 6-contact terminal blocks |
| Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm | |
| Dimensions | 138 x 108 x 49 mm |
| Weight | 650 g |
| Casing | Aluminum Case |
| Mounting | DIN-Rail and Wall Mount |
| Environmental | |
| Operation Temperature | -40˚C to 75˚C (-40˚F to 167˚F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity | 5% to 90% non-condensing |
| MTBF | > 100,000 hrs |
| Regulatory Approvals | |
| EMC | CE (EN55032, EN55035) |
| EMI | FCC Part 15 Subpart B |
| EMS | EN61000-4-2 (ESD); EN61000-4-3 (RS); |
| EN61000-4-4 (EFT); EN61000-4-5 (Surge); | |
| EN61000-4-6 (CS); EN61000-4-8 (PFMF); EN61000-4-11; | |
| Surge Protection | 8KV for PoE, RJ-45 and SFP ports |
| Shock | IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
Downloads & Resources
Download technical documentation, datasheets, and installation guides for the Media Converter
Product Datasheet
Complete technical specifications, features, and performance data for the IMAC-D4F-FMBP media converter.
Frequently Asked Questions ?
What’s the PoE power budget for the HUS-HDM-F82SPp?
It supports IEEE 802.3at PoE+, supplying up to 30W per port and a total budget depending on your power source (typically 120W or more).
Are the SFP uplinks hot-swappable?
Yes, you can install or replace SFP modules without powering down the unit.
Can this model operate outdoors?
While designed for indoor cabinets, it performs reliably in temperature-controlled outdoor enclosures with surge and ESD protection built-in.
What industries typically use this model?
It’s ideal for IP surveillance, smart city edge networks, factory automation, and utility cabinets.