8-Port PoE+ Industrial Ethernet Switch
The Hepda HUS-HDM-F82SPp is a robust industrial unmanaged switch featuring 8 x 10/100Base-TX ports with PoE+ and 2 x 100Base-FX SFP uplinks. Built for harsh environments, this switch simplifies edge device deployment with power and data through a single cable—ideal for IP surveillance, automation, and field networking.
Main Features
Fault Alarm (via electric relay)
The built-in fault alarm function sends out alert via the electric relay when there’s fault on the network switch. It helps measure performance and quickly find out anomalies of the network switch.
Full loading Power Budget
The ET8222PpH-S-DR provides a quick, safe and cost-effective IEEE802.3af/at PoE network solution for various enterprises and infrastructures.
It supports up to 8-port 30-watt per port output, possessing a high loading power budget of up to 240 watts for different kinds of heavy PoE applications.
Dual Power Input for High Reliability
Automatically switch to secondary power input when primary power input fails, ensuring continuous operation without down time.
Redundant power supply reduces possibility of single-point-of-failure.
Environmentally Hardened Design
With a compact metal housing with an IP40 rating
Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations.
Extended ambient operating temperature range: -40 ̊ C to +75 ̊ C
8 10/100/1000Base-TX + 2 1000Base-SFP
Supports IEEE802.3az energy-saving technology
Supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX
9K Bytes Jumbo Frame
Supports Broadcast Storm Control
Supports 802.3x Flow control
10/100/1000Mbps RJ45 Port
Supports external 1000Base-SFP
Supports IEEE 802.3at PoE+ (30W)
2M bits frame buffer memory
Supports Wall-mount and DIN-Rail installation
Technical Specifications
| Standards | IEEE802.3 |
| IEEE802.3u | |
| IEEE802.3x | |
| IEEE802.3z | |
| IEEE802.3az | |
| IEEE802.3ab | |
| IEEE802.1q | |
| IEEE802.1X | |
| Processing Type | Store-and-Forward |
| Forward Filter Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Cabling | 10Base-TX: Cat5 or above |
| 100Base-TX: Cat5 or above | |
| 1000Base-TX: Cat5 or above | |
| Packet Buffer Memory | 2 Mbits |
| Max Packet Length | 9216 Bytes |
| Address Table Size | 4K |
| Switch Fabric | 20Gbps |
| Interface | |
| RJ45 port | 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X |
| PoE port | IEEE 802.3af/at, PoE (30W) , 1/2(+), 3/6(-) |
| SFP port | 1000Base-SFP (Suggest HEPDA SFP) |
| LED Indicators | Power; Link; PoE |
| Optical | |
| SFP port | 1000Mbps |
| Electrical and Mechanical | |
| Input Power | DC9-56V (Terminal block, Redundant power) |
| input voltage for PoE: DC48-56V (suggest 56V) | |
| Power Consumption | 245W, 5.1A@48VDC (PoE in use) |
| 5W, Max. 0.1A@48VDC (PoE not in use) | |
| Connector | 1 removable 6-contact terminal blocks |
| Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm | |
| Dimensions | 138 x 108 x 49 mm |
| Weight | 650 g |
| Casing | Aluminum Case |
| Mounting | DIN-Rail and Wall Mount |
| Environmental | |
| Operation Temperature | -40˚C to 75˚C (-40˚F to 167˚F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity | 5% to 90% non-condensing |
| MTBF | > 100,000 hrs |
| Regulatory Approvals | |
| EMC | CE (EN55032, EN55035) |
| EMI | FCC Part 15 Subpart B |
| EMS | EN61000-4-2 (ESD); EN61000-4-3 (RS); |
| EN61000-4-4 (EFT); EN61000-4-5 (Surge); | |
| EN61000-4-6 (CS); EN61000-4-8 (PFMF); EN61000-4-11; | |
| Surge Protection | 8KV for PoE, RJ-45 and SFP ports |
| Shock | IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
Downloads & Resources
Download technical documentation, datasheets, and installation guides for the Media Converter
Product Datasheet
Complete technical specifications, features, and performance data for the IMAC-D4F-FMBP media converter.
Frequently Asked Questions ?
How much power can each port supply?
Each 10/100Base-TX port supports IEEE 802.3at PoE+ and can deliver up to 30W, totaling a power budget suitable for IP cameras, access points, and sensors.
Are the fiber uplink ports hot-swappable?
Yes, the 100Base-FX SFP uplink ports support hot-swappable SFP modules for long-distance fiber connectivity.
Does the switch require any configuration?
No configuration is required. It’s plug-and-play, optimized for quick deployment.
Can this switch be DIN-rail mounted?
Yes, the compact industrial casing supports DIN-rail and wall-mounting options, suitable for control panels and cabinets.